Step 3: Installing The Blower-Fan Unit (For Xf-640) - Roland DU2-64 User Manual

D Attach two cable clamps at the locations shown in the figure.
M E M O
When using an auxiliary drying unit, it is not necessary to attach new cable clamps to the two
locations of the frame (right) as the cable clamps for the auxiliary drying unit are already at-
tached. Bundle and secure with the auxiliary drying unit cable.
This completes the procedure for installing on the printer.
" P.28 "Connecting the Cables"

Step 3: Installing the Blower-fan Unit (for XF-640)

Procedure
A Remove the left and right covers.
Press the part in the following figure until it clicks. Lightly pull the cover in the direction indi-
1
cated with , and then remove the cover by raising it in the direction indicated by
Cable clamp
Installing on the Printer
2
.
25