Table of Contents
Advertisement
D
Attach the bushing to the stay (right).
E
Attach two cable clamps at the locations shown in the figure.
M E M O
When using an auxiliary drying unit, it is not necessary to attach new cable clamps to the two
locations of the frame (right) as the cable clamps for the auxiliary drying unit are already at-
tached. Bundle and secure with the auxiliary drying unit cable.
Drain bottle
F
Attach the left and right covers.
1
Hang the cover on the hook, and pull down in the direction indicated by
in the following figure until it clicks.
This completes the procedure for installing on the printer.
" P.28 "Connecting the Cables"
Bushing
Cable clamp
Installing on the Printer
2
. Press the part
27
Advertisement
Table of Contents
