Connecting The Cables; When Vg-640/540 Is Used - Roland DU2-64 User Manual

Connecting the Cables

WARNING
WARNING
WARNING
The printer and the drying-heater unit require separate high-capacity electrical outlets.
Make sure to connect the two power cords to outlets on separate systems. Also, make sure
that the electrical outlets meet the machine's ratings.

When VG-640/540 is Used

Connect the drying-heater unit and blower-fan unit cables, and the power cord.
Power Cord
28
Connect to an electrical outlet that complies with this machine's ratings
(for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
This can prevent fire or electrical shock due to current leakage in the event
of malfunction.
Perform this task with all power switches left switched off.
Failure to observe this instruction may cause the machine to move suddenly,
resulting in injury.
Power-cord connector
Power cord
Electrical outlet