Set Access Control - TP-Link RE300 User Manual

Chapter 5
4. Click Save.
5 5

Set Access Control

Access Control allows you to permit or block specific devices from accessing the
internet for a specific period.
Tip:
If the extender is in your router's OneMesh network, it will automatically copy access control settings from your router.
No access control settings is needed for the extender.
1. Visit http://tplinkrepeater.net
2. Go to Settings > Advanced Settings
3. Enable Access Control.
• To block specific device(s):
1. Select Blacklist and click Save.
2. Select the device to be blocked in the
corresponding checkbox.
3. Click Block and the selected device(s) will be added to the
4. Click in the Devices in Blacklist
as needed.
and log in with the password you set for the extender.
> Access Control.
Online Devices
table to set the
Customize Your Network
table by ticking the
Devices in Blacklist
Effective Time for a certain entry
table.
30