Set Access Control - TP-Link RE200 User Manual

Chapter 5
4. Click Save.
5 5
Access Control allows you to permit or block specific devices from accessing the
internet for a specific period.
Note:
Access Control is not available when your range extender is in a OneMesh network, where it automatically synchronizes
network settings from your host router.
1. Visit
for the extender.
2. Go to
3. Enable
• To block specific device(s):
Note:
Devices connected to the extender via an Ethernet cable cannot be blocked.
1. Select
2. Select the device to be blocked in the
corresponding checkbox.
3. Click
4. Click
as needed.
Downloaded from ManualsNet.com

Set Access Control

http://tplinkrepeater.net
Settings > Advanced Settings
Access Control.
Blacklist and click Save.
Block and the selected device(s) will be added to the
in the Devices in Blacklist
search engine
and log in with your TP-Link ID or the password you set
> Access Control.
Online Devices
table to set the Effective Time
Customize Your Network
table by ticking the
Devices in Blacklist table.
for a certain entry
30