TP-Link RE300 User Manual page 16

Chapter 2
3. It is recommended to enable
between dual-band networks. With Smart Connect enabled, your host router's 2.4GHz and 5GHz
share the same SSID (network name) and password. Refer to your host router's user guide to
enable Smart Connect.
5. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED
relocate the extender closer to the router to achieve better signal quality.
Tip:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
6. Enjoy! Connect to the extended network and enjoy the internet.
Smart Connect on your host router to enjoy a seamless connection
Router
Halfway
Set Up Internet Connection
turns solid white. If it doesn't,
Suitable location
Too far from router
No connection
Devices
13