Table of Contents
Advertisement
Object
Start Port
End Port
Alarm Profile Name
Button
: Save configuration.
4.2.5 VLAN Ethernet Type
This section is for you to set up service VLAN type and customer VLAN type. It is IEEE 802.1ad Q-in-Q concept. Before you set
up the type, please confirm where it is 88A8 or 8100 from your network and then set up the VLAN type as the same as your
network. By default, they are both 8100. The screen in
The Page includes the following fields:
Object
Service VLAN Type
Customer VLAN Type
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
Description
Allows user to set up port range.
Allows user to set up port range.
Allows user to indicate a created alarm profile name. Default setting is LINE-DEFAULT.
Figure 4-2-5
Figure 4-2-5: VLAN Ethernet Type Page Screenshot
Description
Allows user to set up Service VLAN type from 0 to ffff as default setting is 8100.
This is 16-hexadecimal code.
Allows user to set up Customer VLAN type from 0 to ffff as default setting is 8100.
This is 16-hexadecimal code.
appears.
- 31 -
Advertisement
Table of Contents
