Aiphone AX Series Instruction Manual
Audio-video adaptor for 3rd party transmission equipment
Hide thumbs
Also See for AX Series:
- Quikstart manual (12 pages) ,
- Instructions (2 pages) ,
- Installation and operation manual (44 pages)
Advertisement
Quick Links
AX Series Audio-Video Adaptor for 3
The AXW-AVT is designed to allow connection of a standard AX-series audio video door station (or audio-
only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3
equipment (Ethernet). External video input is provided at adaptor to allow 3
recording devices, etc. A motion detector or other activation device can be connected to the Sensor input to
trigger door / camera activation. The units also feature a relay output to trigger an external device, such as a
DVR or video switcher local to the AXW-AVT whenever the audio and/or video is active. Alternatively, the
AXW-AVT can be used to adapt an AX-series audio video door station to a standalone third party device
(video server, network DVR, etc).
AXW-AVT
OUT
AXW-AVT TERMINAL DEFINITIONS:
DOOR (RJ-45 Jack):
AUDIO IN/OUT:
CALL IN/OUT:
SENSOR NC, NC:
RELAY NO, NO:
VIDEO IN:
VIDEO OUT:
CCTV / DOOR SWITCH: Determines whether AX-series audio/video door station video ('DOOR' setting) or
24V +, -
- INSTRUCTIONS -
IN
VIDEO
CCTV DOOR
RJ-45 connection from AX-series audio video door, or spliced audio only door (IE/
IF-series).
Input / Output connections for audio transmission (line level, polarity indicated by
'+' and '-').
Transistor-switched input / output to be connected to relay input / output on
transmission equipment. 'Call In' indicates call placed by door station, 'Call Out'
indicates master-initiated activity (polarity indicated by '+' and '-').
Normally Closed contact input, activates 'Call In' function when tripped by external
motion detector or other device with N/C contacts.
Normally Open relay contact, activated whenever communication is active.
Composite input signal from CCTV camera, if used in place of AX-series audio
video door station.
Composite output to external transmission equipment. Source dependent upon
CCTV / DOOR switch.
external CCTV video ('CCTV' setting) will be present on 'VIDEO OUT' for
connection to external transmission equipment.
24V DC input (use Aiphone PS-2420UL).
rd
Party Transmission Equipment
rd
AUDIO
DOOR
IN
OUT
IN
+
-
+
-
+
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 389-0000
rd
party transmission
party camera input, output to
CALL
SENSOR
RELAY
OUT
24V
-
+
-
+
NC NC
NO NO
AXW-AVT
-
Pg. 1
Advertisement
Related Manuals for Aiphone AX Series
Summary of Contents for Aiphone AX Series
- Page 1 Sold by: http://www.TWAcomm.com Toll Free: (877) 389-0000 AX Series Audio-Video Adaptor for 3 Party Transmission Equipment - INSTRUCTIONS - The AXW-AVT is designed to allow connection of a standard AX-series audio video door station (or audio- only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3 party transmission equipment (Ethernet).
- Page 2 Please Note: Only information pertaining to the connection and operation of the AXW-AVT / AXW-AVR and listed 3 party devices interfacing with it are included here. Aiphone is not responsible for attempts to connect the AXW-AVT / AXW-AVR to untested 3 party transmission hardware.
- Page 3 AXW-AVT Internal Jumper Settings: The AXW-AVT has three internal jumper settings to control the functionality and conditioning of the audio circuitry. These should be adjusted as necessary, based on the selection of fiber / Ethernet equipment used. To access these jumpers, the chassis of the AXW-AVT will need to be opened. Adjusting these jumper settings will NOT invalidate the AXW-AVT’s warranty.
-
Page 4: Specifications
Note: Only information pertaining to the connection and operation of the AXW-AVT and devices interfacing with it are included here. Aiphone is not responsible for attempts to connect the AXW-AVT to untested 3 party transmission hardware. For the most up-to-date compatibility information, please consult http://www.aiphone.com or contact Aiphone Technical Support.