SEVERIN AT 2590 Instructions For Use Manual page 14

Hint:
To achieve regular browning when
toasting only two slices, both slots
should be used.
Defrost function
The defrost function ( ) may be used in
addition to the normal action when toasting
deep-frozen bread. This will extend the
toasting process. This function is shown by
the indicator lamp.
Warm-up function
The warm-up function ( ) is suitable
for re-heating bread which has already
been toasted. Caution: Do not warm up
buttered bread.
After activating the toasting function, the
warm-up function can be used in addition.
This function is shown by the indicator
lamp.
Interrupting the toasting cycle
If you want to interrupt the toasting cycle,
press the eject button ( ). The toaster will
switch off and the slices are ejected. The
indicator light goes out.
Warming up rolls, buns etc.
∙ To warm up buns, rolls or other bakery
items, push the slide control operating
lever for the warming top all the way
down to raise the bread roll holder.
∙ Place the items to be warmed up on
the top, adjust the browning control to a
medium setting and then push down the
operating lever to switch on the toaster.
∙ Once the browning cycle is complete
14
and the appliance has automatically
switched off, turn the roll or bread over
and repeat the cycle.
∙ After use, return the bread roll holder
to its rest position by pushing the slide
control back up.
∙ Do not place the items directly on the
toast slot.
Cleaning and care
∙ Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids or
immerse it.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ The housing may be wiped with a dry or
slightly damp lint-free cloth.
Crumb tray
During use, any bread crumbs falling down
are collected in the crumb tray. To empty
the tray, pull it out sideways. Make sure to
replace the crumb tray before the toaster is
used again.
Power cord storage
Unwind the power cord completely before
operation and make sure it is kept well
away from the appliance.
Allow for a suffi cient cooling-down period
before winding up the power cord after use.