Appendix I-Thermal Print Head Replacement - SATO Argox OS Series User Manual

Appendix I-Thermal Print Head Replacement

1. Switch off the power and wait for both the LEDs to go off.
2. Open the top cover.
3. Unlatch the print head module and swing it to the opposite.
4. Push the TPH firmly into the mounting bracket to release it from
the module.
5. Disassemble the TPH and the metal plate by removing the
screws.
6. Unplug the 2 print head cables from the connectors on the old
TPH-module.
OS-2130D & OS-2130DE User's Manual
64