Philips S6680 Manual page 24

24
English
8 Place the shaving heads in the shaving head
holder.
Note: Make sure that the projections of the
shaving heads fit exactly into the recesses of
the shaving head holder.
9 Place the retaining rings back onto the shaving
head holder and turn them clockwise ('click').
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.
- Each retaining ring has two recesses and two
projections that fit exactly in the projections
and recesses of the shaving head holder.
10 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder.