Texas Instruments TMS320C64X Programmer's Reference Manual page 108

DSP_blk_eswap32
DSP_blk_eswap32
Function
Arguments
Description
Algorithm
4-80
Endian-Swap a Block of 32-Bit Values
void blk_eswap32(void * restrict x, void * restrict r, int nx)
x [nx] Source data. Must be double-word aligned.
r [nx] Destination array. Must be double-word aligned.
nx Number of 32-bit values to swap. Must be multiple of 4.
The data in the x[] array is endian swapped, meaning that the byte-order of the
bytes within each word of the r[] array is reversed. This facilitates moving
big-endian data to a little-endian system or vice-versa.
When the r pointer is non-NULL, the endian-swap occurs out-of-place, similar
to a block move. When the r pointer is NULL, the endian-swap occurs in-place,
allowing the swap to occur without using any additional storage.
This is the C equivalent of the assembly code without restrictions. Note that the
assembly code is hand optimized and restrictions may apply.
void DSP_blk_eswap32(void *x, void *r, int
{
int i;
char *_x, *_r;
if (r)
{
_x = (char *)x;
_r = (char *)r;
} else
{
_x = (char *)x;
_r = (char *)r;
}
for (i = 0; i < nx; i++)
{
char t0, t1, t2, t3;
t0 = _x[i*4 + 3];
t1 = _x[i*4 + 2];
nx)