Installation Procedure - Canon Inner Finisher-D1 Installation Procedures Manual

Installation Procedure

Installation Procedure
1) Hold the positions shown in the figure and take out the finisher from the carton.
CAUTION:
Hold the positions specified by the instruction labels or the unit may break.
2) Remove the metal fixtures, all the shipping tapes and the cushioning materials. (Removed
screws are no longer reused.)
CAUTION:
The following order must be upheld:
1) Remove 3 screws to detach the 2 fixtures.
2) Remove the upper packing material.
3) Remove the lower packing material.
F-1-7
5
x3
F-1-8
5