Canon i 950 Installation Instruction
Continuous ink supply system
Hide thumbs
Also See for i 950:
- Quick start manual (68 pages) ,
- Setup instructions (2 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Continuous Ink Supply System
Canon i950 Printer
Installation Instruction
For TL Ink Pre-filled Version
The whole operation is very easy. It's really an effective tool to save your
money.
CIS for Canon i950 Instruction
I. What's in the TL-i950 Continuous Ink Supply system?
1) 6 * 100ml Reservoir Bottles;
2) Tubing Attached with Cartridge and Chips;
3) A set of Support Arm;
4) 6 * Vacuum Pump (Filling tools).
for
Advertisement
Related Manuals for Canon i 950
Summary of Contents for Canon i 950
- Page 1 For TL Ink Pre-filled Version The whole operation is very easy. It’s really an effective tool to save your money. CIS for Canon i950 Instruction I. What’s in the TL-i950 Continuous Ink Supply system? 1) 6 * 100ml Reservoir Bottles;...
- Page 2 Printing has been a different experience ever since you installed TL Continuous Ink Supply system on your own printer. Just imagining being able to print without regard to the ink level in those expensive little cartridges.
- Page 3 1) Open the window of the Computer and find the Control Panel. Then click “Printer and Other Hardware” 2) Click the right button of mouse on Canon i950 Series. Then click the Properties and choose the “Nozzle Check” as the below picture shown.
- Page 4 (Picture A) and attach Support Arm to the printer as the Picture B shows. (Picture A) 5. Attach the small tube clamp at the right of the printer and Make sure it is parallel with the Support Arm as the below picture shown.
- Page 5 8. Slide the cartridge back and forth from left to right several times; make sure the tubes not too tight when cartridge is in the far right and left position. 9. Open the upper cap of the Reservoir bottle as the below picture shown. Now everything is put together! Double check your cartridge;...
- Page 6 2. Try to keep at least 1/2 inch of ink in the bottles, as you don’t want to run out of ink and draw air into the cartridge. 3. Don’t place the Reservoir Bottles higher or lower much than the printer. 4. To be used in a dry place between 15 and 35degree. Avoid exposure to direct sunlight.