Napoleon PRO825 Manual page 16

when valve turned to procedure.
high.
For natural gas - undersized supply line.
Sear plates installed incorrectly.
uneven heat.
Excessive grease and ash build on sear
plates and in drip pan.
Burners burn with Possible spider web or other debris, or
accompanied by the
smell of gas.
burner, accompanied
by the smell of gas, and
Main burner will not
light with the igniter,
but will light with a
match.
Normal occurrence on hot days.
Burners will not cross
light each other.
Grease build-up on inside surfaces.
peeling inside lid or
hood.
Burner output on
too low. (Rumbling Supply hose is pinched.
surface.)
tube.
on slowly to allow pressure to equalize. See
code.
Preheat grill with both main burners on high
for 10 to 15 minutes.
Ensure sear plates are installed with the holes
Preheat grill with both main burners on high
for 10 to 15 minutes.
Clean sear plates and drip pan regularly. Do not
line pan with aluminum foil. Refer to cleaning
the performance or safety of the gas grill.
Clean or replace as required.
peeling is caused by hardened grease, which
Regular cleaning will prevent this. See cleaning
Clean out venturi tube.
on slowly to allow pressure to equalize. See
www.napoleongrills.com
17
EN