Greenheck ERVe-20 Assembly And Installation Instructions page 2
Roof curb and duct adapter assembly
Hide thumbs
Also See for ERVe-20:
- Installation, operation and maintenance manual (28 pages) ,
- Installation, operation and maintenance manual (28 pages)
Advertisement
STEP 2:
Assemble Main Curb for Model ERVe
Instructions: • See ERVe Main Curb Assembly for positioning of the correct hardware.
• Align the holes and fasten as shown below.
ERVe Hardware Required:
(24) Screws, SMS (A) 12 x 0.625 (IHH)
(2) End Channels
(1) Center Channel
(2) Side Channels
(1) End Support
Overall Curb Dimensions for Model ERVe
ERVe-20
W
40.353
L
61.103
All dimensions shown are in inches.
STEP 3:
Final Roof Curb Assembly for Model ERVe
ERVe Hardware Required:
(4) Screws, SMS (A) 12 x 0.625 (IHH)
(2) Insulation Pans
(1) Duct Adaptor
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
2
472119 • Roof Curb and Duct Adapter Assembly, Rev. 3, November 2019
L
ERVe-35
ERVe-45
48.478
55.478
63.353
67.353
• Cordless drill
•
• Awl — for hole alignment
End
Support
Center
Channel
ERVe-55
65.416
78.228
All curbs shipped for ERVe units will include a duct
adaptor regardless of ducting arrangement.
Duct
Adaptor
Copyright 2019 © Greenheck Fan Corporation
SPECIAL TOOLS REQUIRED
5
/
in. Nut setter
16
W
NOTE
Advertisement
