Changing Your Radio Setup; Dab Only Options; Station Order; Fm Only Options - PURE Chronos CD Owner's Manual

Changing your radio setup

DAB only options

Station Order

Alphanumeric
Fav station
Active station
Multiplex
Trim stations
Autotune
Scans all DAB Band III frequencies for stations and adds any new ones to the station list. To
stop an Autotune press Select.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to
hear at low volume or in a noisy environment. Check with the broadcasters to find out if they
use DRC.
DRC full
DRC half
DRC off

Manual tune

Shows DAB signal level which can help you find the best position for your radio.
1. Use the +/- buttons to scroll through different channels and push Select to choose one
(UK stations are in the range 11B to 12D). You see a signal level display. The empty
block indicates the minimum required level for reception and the filled blocks indicate
the current level.
2. Move your aerial/unit and to try to raise the current level to the empty block or beyond.
Once you have a good signal the display will show the multiplex name and add the
stations to the station list.
3. Push the Menu button to exit or +/- and Select buttons to change channel.

FM only options

FM stereo mode

Choose from Stereo or Mono - mono may improve audio clarity where stereo signals are weak.

CD only options

CD play order
Choose the order CD tracks are played in. Choose from Normal, Repeat one (repeats current
track), Repeat folder (tracks in current folder (MP3/WMA) or all (normal CD)), Repeat all
(whole CD) or Random.
Lists all stations in alphanumeric order.
Lists the ten most listened to stations first on the station list in
alphanumeric order.
Lists active stations first on the station list.
Lists stations in groups according to their multiplex.
Removes inactive stations from the station list.
Applies the DRC level as sent with the broadcast.
DRC level is set to half that sent with the broadcast.
Any DRC level broadcast will be ignored.
9