Safety - PURE Move T4 User Manual

Safety

Before youuse your Move T4,read the following safety instructions.
1.
Read allthe safety informationand instructions before using the product.Whenpassing this product to someone,
include alldocuments.
2.
If youdo not follow the operating instructions provided,it may compromise the safety of your product and this may
invalidate the warranty.
3.
Do not expose the product to dripping or splashing.Do not place objects filled withliquids,suchas vases,onthe
product.
If liquid or water spills onto the product,switchit off immediately and contact your dealer.
If youare using a mains-powered adapter,do not touchthe product withwet hands.
4.
The internalbattery inthis product is not user replaceable.Do not expose the battery to excessive heat or naked
flames.Ensure adequate ventilationand airflow around the product,particuarly whencharging.Dispose of the
product inaccordance withlocalenvironmentalrules.
5.
Using the product inrooms or climates withhighhumidity and temperatures may cause condensationto form inside
the product,whichcandamage the product.Use the product inmoderate climates only.
6.
Do not use your product inextremely hot or cold temperature.Keep the device away from heat sources,suchas
radiators or gas/electric fires.Do not expose your product to naked flames,suchas lighted candles.
7.
To charge your product,only connect it to a supply source that meets the safety isolationrequirements of
EN 60065 or EN 60950-1 for anaccessible safety extra low voltage circuit.For this connection,use either the
supplied micro-USB cable or a suitably CE approved power adapter withthe correct USB output rating.
8.
Power the product using anexternal5 V DC 1.5 A power supply.The maximum output current is 1.5 A,protected by
aninternalcircuit.
9.
Before youcharge your product,ensure that the available supply voltage corresponds withthe required
operationalvoltage of the product.
10.
Disconnect your product from the charging power supply if youwillnot use your product for a long period of time
(for example,if youare going onholiday).
11.
Always unplug your product from the charging power supply before cleaning.Whencleaning the product,do not
use any type of abrasive pad or abrasive cleaning solutions as these may damage the product's surface.
12.
To reduce the risk of electric shock,do not remove any screws.The product does not containany user-serviceable
parts inside.Product repairs should only be carried out by authorised personnel.
2