›
Insert the cover in the wheel arch and lock into
place.
Rear turn signal and reversing lights
Loosen and remove the light
›
Open the relevant cover in the luggage compart-
ment.
Cover on the left
Cover on the right - vehicle with standard rear
seats
Cover on the right - vehicle with VarioFlex rear
seats
Lighting, windscreen wipers and washers ›
›
Unscrew the screw.
›
Remove the light.
›
Slightly pull out the
lock
at the plug.
A
›
Press the safety button
and remove the plug.
Replacing the light bulb
›
Insert the bulb holder into the light and snap into
place.
NOTICE
Risk of damage to the electrical system!
Make sure that no cables are pinched when insert-
▶
ing the holder into the light.
Insert and fix the light
›
Insert the connector into the light until it clicks into
place.
›
Push in the slightly pulled out locking device on the
plug.
›
Insert the lamp with the strips
in the bodywork and push in carefully until it
B
stops.
NOTICE
Risk of damage to the electrical system due to water
ingress!
Make sure that the seal is inserted correctly when
▶
installing the light
.
C
Replace light bulbs
53
›
Unlock and remove the
lamp holder
.
A
›
Change the bulb in the
socket.
›
The base for the bulb
in the turn signal light
is marked with
.
The base for the bulb
in the reverse light is
marked with
.
›
Check that the plug
A
securely connected.
into the grooves
A