Data Connection - Skoda KAROQ Owner's Manual

152 Infotainment Columbus ›
Infotainment stores passwords for previously
connected hotspots.
Security level of the Infotainment hotspot
The security level is factory-set at WPA2 and cannot
be changed.
Change the name of the Infotainment hotspot
›
Tap Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
SSID:.
›
Enter the name and confirm.
›
Tap Save.
Change password for connection to Infotainment
hotspot
The password must be a minimum of 8 and a maxi-
mum of 63 characters.
›
Tap Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
Network key:.
›
Enter the password and confirm.
›
Tap Save.
Manual connection of Infotainment to the mobile
device hotspot
›
Set the hotspot backup of the mobile device to
WPA2.
›
Turn on the ignition.
›
Turn on the Infotainment's Wi-Fi unit in the menu
item Wi-Fi Wi-Fi: Wi-Fi.
›
Tap Manual settings.
›
Enter the name of the hotspot to connect to and
the access password.
›
Tap Connect.
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Tips for a perfect connection
Keep only the hotspot to be connected switched
▶
on and switch off the other hotspots.
Delete unused hotspots. This shortens the time re-
▶
quired to establish a connection.
For some hotspots, the connection takes longer, so
▶
wait for the connection to finish.
If the connection is interrupted, recheck the availa-
▶
ble hotspots and repeat the connection.

Data connection

Settings
Mobile data
Mobile data for the data connection may be sub-
ject to charges according to the mobile network
operator's tariff conditions.
Types of data connection setup
By connecting the Infotainment with the external
▶
hotspot via Wi-Fi.
Data connection
▶
▶
Connection via a data SIM card in the external
module
A SIM card size mini (standard size 25x15 mm) with
enabled data services must be used.
›
›
›
When inserting an incorrectly sized SIM card or in
the wrong direction, there is a risk of damage to the
external module.
›
›
›
Or:
›
›
your provider whether one of the displayed provid-
ers can be used.
Set network parameters
›
›
contact the data service provider.
Set the parameters for the data connection
›
›
Connection to the phone via rSAP Bluetooth® pro-
file
›
›
›
By using a SIM card with data services inserted in
the external module of the Infotainment.
By connecting the Infotainment with a mobile
phone via the Bluetooth® profile rSAP.
Switch on the ignition and the Infotainment.
Turn on the menu item in
"Business".
Insert a SIM card into the corresponding slot in the
external module in the storage compartment on
the passenger's side .
Insert the SIM card with the bevelled corner on
the left and the contacts facing downwards until
it locks.
NOTICE
Select one of the following menu items to use the
SIM card.
▶ Calls too - enabling data and telephone services.
Only data connections - enabling of data services only.
▶
If the SIM card is protected by a PIN code, then the
PIN code of the SIM card must be entered.
Confirm the entered PIN code by tapping
Tap to save and confirm the PIN code.
Set the data service provider's required network
and confirm the Internet connection.
If your data provider is not available in the list, ask
Tap Network.
Set the desired parameters.
For accurate parameters for setting the network,
Tap Network Data Connection:.
Set the desired parameters.
Switch on the ignition and the Infotainment.
Turn on the menu item in
"Business".
Turn on the Bluetooth® in Infotainment
Bluetooth Bluetooth.
Telephone interface
.
Telephone interface