Changing The Sound Range Display; Muting The Volume; Using Headphones (Not Included) - Technics SC-EH560 Operating Instructions Manual

SC-EH760 SC-EH560
A
DISPLAY MODE DISPLAY MODE
– UV DEMO
SC-EH760 SC-EH560
DISPLAY MODE
- UV DEMO
DISPLAY MODE
a
FLAT
HEAVY
CLEAR
b
FLAT
HEAVY
CLEAR
c
FLAT
HEAVY
CLEAR
B
TEST UPRO LOGIC
VCR/AUX/
6CH INPUT DECK 1/2
MUTING M N
MUTING
∂
(On the tuner amplifier)
MUTING
C
(On the sound processor)
SUPER DIGITAL
SURROUND S.WOOFER
TAPE/ TUNER/
CD
BAND
⁄/g » ¤ ¤
VOLUME µ
VOLUME
Changing the sound range
A
display
The sound processor shows the level of each sound range with the
three types of display described below.
[SC-EH760]
Press [DISPLAY MODE].
[SC-EH560]
Press [DISPLAY MODE, –
The spectrum display will change as follows.
[a] Normal display
This display indicates the strength of the sound in each tonal
range.
[b] Peak-hold display
The peak sound value of each sound range is held on the dis-
play for about one second after it occurs.
[c] Aurora display
The peak sound value of each sound range is displayed in in-
HALL
verted form.
AI-EQ
M.EQ

Muting the volume

B
HALL
AI-EQ
M.EQ
Remote control only
HALL
AI-EQ
Press [MUTING].
M.EQ
Volume is reduced to minimum.
To cancel
Press [MUTING] again.
"MUTING" goes out and the volume is restored.
To cancel from the tuner amplifier, turn [VOLUME] to minimum
(– – dB), then raise it to the required level.
Muting is also canceled when the unit is turned off.
Using headphones
C
(not included)
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: 3.5 mm stereo
V DEMO].
37
RQT5355