Using The Timers - Technics SC-EH560 Operating Instructions Manual

6
œPLAY/œREC
1
CLOCK/TIMER
1
DEMO
@
2
SET
2–5
? TUNING
1
SET
2
6
H/I
34
RQT5355
1 2–5
FPLAY
@
2
FPLAY
3
FPLAY
4
FPLAY
CH
FPLAY
5
FPLAY
FPLAY
FPLAY

Using the timers

The play timer
This timer starts play of the selected source at the selected time. The
example shows settings for preset radio channel 8 to play between
6:30 and 7:40 at 40 dB.
Preparation:
Turn the unit on, set the time (
radio stations if you want the timer to start playing
the radio (
1
Press [CLOCK/TIMER, –DEMO] to
select " PLAY."
Each time you press the button:
CLOCK
Press [SET] within 3 seconds.
2–5
Press [TUNING (
the condition required and
press [SET].
2 Select the start time.
3 Select the finish time.
4 Select the source.
TUNER
Insert a CD or tape if you select these sources.
If you select TUNER
Select a preset channel.
5 Select the volume.
The play timer is now on standby. The display shows each
condition again then restores the original display.
6
Press [ /I] to turn the unit off.
" PLAY/ REC" indicator remains illuminated to show the
play (or record) timer is on even when ECO mode is selected
( page 11).
The timer starts at the set time with the volume increasing gradually
to the set level.
To cancel the timer
Press [ PLAY/ REC] so " PLAY" goes out.
Each time you press the button:
PLAY REC
The play timer function will be canceled, but the settings stay in the
MHz
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.
page 11), preset
page 17).
PLAY REC Original display
or )] to select
CD TAPE
PLAY REC Light off (OFF)