Display - Pioneer XRB3059-A Operating Instructions Manual

Controls and displays
8 PHONES jack
Use to connect headphones (when connected,
there is no sound output from the speakers).
9 STANDBY/ON
Switches the receiver between on and standby.
10 VIDEO INPUT
See Connecting to the front panel video terminal
on page 17.
11 USB interface
Connect a USB audio device for playback (see
Using the USB interface on page 34).
12 MCACC SETUP MIC jack
Use to connect the supplied microphone.
13 MASTER VOLUME dial
14 DIMMER
Dims or brightens the display.
15 ANALOG ATT
Attenuates (lowers) the level of an analog input
signal to prevent distortion.
16 MIDNIGHT/LOUDNESS
Switches between Midnight and Loudness
listening (page 32).
17 SPEAKERS
Use to change the speaker system (page 54)
and the speaker impedance setting (page 63).

Display

1
1 SIGNAL indicators
Lights to indicate the type of input signal:
AUTO – Lights when AUTO signal select is
on.
2 3 4 5
12 13 14 15
18 TUNING / STATION
Selects the frequency (page 45) and station
presets (page 46) when using the tuner.
19 TUNER EDIT
Press to memorize and name a station for
recall (page 46).
20 TONE
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG dial (page 32).
21 QUICK SETUP
See Using the Quick Setup on page 8.
22 System Setup menu controls
SETUP – Use with the MULTI JOG dial to
access the System Setup menu (page 9,
page 36, page 58).
RETURN – Press to confirm and exit the
current menu.
23 SIGNAL SELECT
Use to select an input signal (page 33).
24 SBch PROCESSING
Selects surround back channel processing or
the virtual surround back mode (page 31).
25 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ
setting (page 30).
6 7 8 9 10
SP
16 17 18 19 20
SB – Depending on the source, this lights
when a signal with surround back channel
encoding is detected.
11
[ L ] 6
[ ]
C
[ ]
AB R
[ ]
R s
0
[ R ]
SB
[ ]
L
SB
[ L ]
s
6
4 0 125 25 0 4 K1 3 K
21
05
23
En