Confirming Preset Codes; Controls For Tvs - Pioneer XRB3059-A Operating Instructions Manual

Audio/video multi-channel receiver

Hide thumbs

Table Of Contents

Table of Contents

Controlling the rest of your system

While pressing the RECEIVER button,

press the SETUP button.

The remote LCD display shows SETUP.

Use

to select DIRECT F then press

ENTER .

Press the MULTI CONTROL button for the

component you want to control then press

ENTER .

The LCD on the remote displays the

component you want to control.

Use

to switch direct function ON or

OFF then press ENTER .

The LCD shows OK to confirm the setting.

Press and hold RECEIVER for about two

seconds to exit the SETUP.

Controls for TVs

This remote control can control components after entering the proper codes or teaching the

receiver the commands (see Operating other Pioneer components on page 48 for more on this).

Use the MULTI CONTROL buttons to select the component.

• The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to

the TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.

Button(s)

Function

Switches the DTV on or off.

Switches the TV or CATV between standby and on.

INPUT

Switches the TV input. (Not possib

SELECT

le with all models.)

TV CH +/–

Selects channels.

TV VOL +/– Adjust the TV volume.

SOURCE

Press to switch the component assigned to the TV CTRL

button on or off.

Switches the DTV on or off.

Press to get information on DTV programs.

Use to choose the BLUE commands on a DTV menu.