Replacing Purge Bulb - Echo CS-2510TES Service Manual

CS-2510TES
250Ts, 250TCs

4-5 Replacing purge bulb

A
a1
C
B
a2
A
a3
FUEL SYSTEM
C
B
{Removing}
1. Remove air cleaner cover and air fi lter (Refer to
"4-1 Inspecting air fi lter" ).
2. Remove carburetor elbow and carburetor (Refer
to "4-8 Testing carburetor" ).
3. Press leg (a1) of purge bulb (A) with screwdriver
to remove purge bulb (A) from rear handle.
4. Disconnect parge line (B) and fuel return line (C)
from purge bulb (A).
{Installing}
5. Connect fuel return line (C) to longer fi tting (a2)
of purge bulb (A). Connect purge line (B) to shorter
fi tting (a3) of purge bulb (A).
6. Push purge bulb (A) into rear handle.
7. Reassemble removed parts (Refer to "4-14 In-
stalling carburetor").
31