Adjusting The Focus And Zoom; Switching The Picture Mode; Adjusting The Image; Switching Off The Projector Automatically - Panasonic PT-AE2000E Operating Instructions Manual

Adjusting with RGB options
1. Press the ENTER button until the required option
is displayed.
2. Press the PIC. ADJUST twice to display the
GAMMA of the ADVANCED MENU menu.
3. Press G several times to display the required
brightness option.
4. Adjust the brightness option by pressing I H.
Adjust the bottom line of the waveform to 0%
(0 IRE or 7.5 IRE).
Setting range: -16 to +16
5. Press G once to display the required contrast
option.
6. Adjust the contrast option by pressing I H.
Adjust the top line of the waveform to 100%
(100 IRE).
Setting range: -32 to +32

Adjusting the focus and zoom

You can adjust the focus and zoom of the
projected image. Press the LENS button to

Switching the picture mode

You can switch the preset picture mode
settings by pressing the PIC. MODE button.
Press the button until the required setting is
selected. See "PICTURE MODE" on page 31.

Adjusting the image

You can display the PICTURE and
ADVANCED MENU menu items with called
up style by pressing the PIC. ADJUST
button. Press the button to switch between
PICTURE and ADVANCED MENU menu. Press F G to
select the required menu item and I H to adjust.
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS,
COLOUR, TINT, SHARPNESS, COLOUR
TEMPERATURE and DYNAMIC IRIS

Switching off the projector automatically

You can switch off the POWER
automatically by setting the SLEEP feature.
Press the SLEEP button several times to
cycle through the duration of time. See
"SLEEP" on page 41.
Remote control operation
FULL SCAN(R)/SINGLE LINE SCAN(R)
Adjust the bottom line of the
BRIGHTNESS R
waveform to 0% (0 IRE or 7.5 IRE)
Adjust the top line of the waveform
CONTRAST R
to 100% (100 IRE)
FULL SCAN(G)/SINGLE LINE SCAN(G)
Adjust the bottom line of the
BRIGHTNESS G
waveform to 0% (0 IRE or 7.5 IRE)
Adjust the top line of the waveform
CONTRAST G
to 100% (100 IRE)
FULL SCAN(B)/
Adjust the bottom line of the
BRIGHTNESS B
waveform to 0% (0 IRE or 7.5 IRE)
Adjust the top line of the waveform
CONTRAST B
to 100% (100 IRE)
display the LENS CONTROL menu. See "LENS
CONTROL" on page 39.
NORMAL
DYNAMIC
COLOUR1
COLOUR2
ADVANCED MENU items
GAMMA, CONTRAST, BRIGHTNESS, xvYCC,
DETAIL CLARITY, NR, MPEG NR, CINEMA
REALITY and TV-SYSTEM
NOTE:
• For each menu items description, see "PICTURE
menu" on page 31.
• The screen will be cleared after 7 seconds without
any operation.
OFF
60MIN.
90MIN.
120MIN.
CINEMA3
CINEMA2
CINEMA1
240MIN.
210MIN.
180MIN.
150MIN.
E
NGLISH - 25