Option Menu; Input Guide; Osd Design; Osd Position - Panasonic PT-AE2000E Operating Instructions Manual

OPTION menu

Remote control
See "Navigating through the MENU" on page 30.
See "Main menu and sub-menu" on page 28.

INPUT GUIDE

When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
Options
OFF Turn off the guidance.
Display the input method by text. The
SIMPLE INPUT GUIDE will go out after
5 seconds without any operation.
Display the input method by graphic. The
DETAILED INPUT GUIDE will go out after
10 seconds without any operation.

OSD DESIGN

You can change the background colour of the menu.
Press I H to cycle through the options.
TYPE1
TYPE2
TYPE3

OSD POSITION

You can change the position where to display the menu.
Press I H to cycle through the options.
UPPER
LEFT
LOWER
LEFT
E
40 - NGLISH
Control panel
Function
Semi transparent black
Solid blue
Semi transparent dark blue
UPPER UPPER
CENTRE RIGHT
CENTRE
LOWER LOWER
CENTRE RIGHT

BACK COLOUR

You can choose a screen colour from BLUE or BLACK
for when the projector is in idle. Press I H to select.

STARTUP LOGO

You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
ON Active
OFF Deactive

AUTO SEARCH

When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch the system on/off. Press I H to cycle
through the options.
ON Active
OFF Deactive
NOTE:
• When no signal is detected, the last used input will be
selected.

HDMI SIGNAL LEVEL

When an HDMI IN is selected, you can switch the HDMI
signal NORMAL or EXPAND to display the image. Press
I H to select an option.
NORMAL For general HDMI equipment
EXPAND For HDMI equipment with expanded
signals.
NOTE:
• HDMI SIGNAL LEVEL is not available with some
equipment.

FRAME RESPONSE

You can minimise the time delay of image displaying for
the interlace signals.
NORMAL Prioritise the image quality
FAST Prioritise the frame response