Mitel SX-200 Practices page 195

Features
SUPERSET Telephones:
To display the current Forwarding type and destination:
. Press the DISPLAY key.
l
Press the CALL FWD softkey - read the display.
l
Press the EXIT softkey.
To activate Forwarding already programmed:
l
Press the SELECT FEATURES key.
0 Dial 1 (feature number 1 is Forwarding (1:FWD)) -the current type
and destination are displayed.
l
Press the ON softkey to activate forwarding; if activation is not desired,
press the EXIT softkey.
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
To deactivate Forwarding:
l
Press the SELECT FEATURES key.
l
Dial 1 (feature number 1 is Forwarding (1 :FWD)) - the current type
and destination are displayed.
l
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
To Set Up or Modify Forwarding:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until Call Forwarding - Busy/Don' t Answer is displayed; then press
the YES softkey.
l
Dial the forwarding destination, or press a Speedcall key.
l
Check the number on the display.
- To correct an error, use the 4-- key.
l
Press the SAVE softkey when the correct destination is displayed.
SUPERSET DN Telephones:
To display the current forwarding type and destination:
. Press
SuperKey.
l
Find the Forwarding softkey. (Use the
More
softkey).
9109-09&105-NA
Issue1
Revision
0 105 2-123