Advertisement
-Select MAN in the TIMER box to
en
manually set the cooler on and off.
it
4 - OPERATING MODES WITH
TEMPERATURE OR HUMIDITY
de
LIMITS:
es
Use the specific drop-down menu to
choose the temperature or humidity
fr
as a reference parameter. Selecting
nl
LOCAL defines the "LEADER" cooler
of an area; similarly, selecting AREA
pt
defines a "SLAVE" cooler. Moving the
da
cursor to LIMIT allows you to set the
reference value for the temperature
fi
or humidity.
no
5 - MOTOR ROTATION SPEED:
-Actuate
the
sv
button to increase the rotation speed.
pl
- Actuate the left arrow-shaped button
to decrease the rotation speed.
ru
cs
►3.7.4. All parameters must be set if the
hu
cooler is configured for "INDIVIDUAL"
or "LEADER" mode. If the cooler is
sl
configured for "SLAVE" mode, the
tr
"LEADER" device configuration of the
relevant area is implemented.
hr
lt
lv
et
►►4. OPERATION
ro
(Pic. 9)
sk
WARNING:
"SAFETY
INFORMATION"
bg
switching on the cooler.
uk
WARNING: Only use clean water to
bs
prevent failures or other anomalies.
el
WARNING: Verify if your electronic
system is earthed correctly. Connection
zh
to the electrical mains must be carried
out in compliance with the national
standards in force. Only power the
appliance the with voltage and frequency
as specified on the nameplate.
right
arrow-shaped
Carefully
read
before
IMPORTANT: The cooler is equipped
with a water drain, located at the
base of the appliance. The cooler will
completely drain the water from the
tank, and execute a wash cycle after
three days of inactivity. During the
winter season or in the event of a long
period of inactivity, leave the circuit
and water tank empty.
►ON/OFF: Used to turn the cooler on
or off.
►ARROW < >: Increases or decreases
the ventilation speed.
►COOLING: Enables or disables the
cooling mode.
►VENTILATION:
ventilation mode only.
►INTAKE: Enables the intake mode.
►AUX: Allows you to activate or
deactivate a 220 VAC output for an
optional load to be implemented.
►DRAIN: Drains the water from the
tank.
►►5. CLEANING AND
MAINTENANCE
WARNING: BEFORE CARRYING OUT
the
ANY MAINTENANCE OR REPAIRS,
DISCONNECT THE APPLIANCE FROM
THE MAINS POWER AND WATER
SUPPLY.
Depending on the environment where
the appliance is used, dust, dirt, etc. can
affect the performance of the cooler.
We therefore recommend cleaning
(never clean with a high pressure water
jet) the outside of the cooler with a soft
cloth, removing any obstructions from
the air vents.
Enables
the
Advertisement
