Intended Use; Instructions Before Installation; Installing The Inner Frame - Dometic Heki de Luxe Installation Manual

Heki Accessory
4

Intended use

The Heki 2 de Luxe inner frame (item no. 9104100241) is used to retrofit an
existing Heki 2 roof light in a camper or caravan with blackout, insect screen
and lighting. The four lights cannot be dimmed.
5

Instructions before installation

➤ Make sure that the power supply line and a switch are available for the
Heki 2 de Luxe inner frame lighting (12 V, 4 x 5 W) in the vehicle.
➤ Make sure that the power supply line is suitably arranged and protected.
If you do not want lighting, the bulb holder must be removed before installa-
tion, and after mounting the ventilation grille must be inserted instead of the
lamp cover.
6

Installing the inner frame

I
NOTE
Get another person to assist you in removing the old inner frame
and installing the new inner frame.
➤ If you do not want to use the lighting: Remove the bulb holder in the new
inner frame.
➤ Remove the inner frame of the existing Heki 2 roof light (fig. 2 – fig. 4).
➤ Lay the power supply line in the middle onto one of the two long sides.
➤ Allow the power supply line to protrude about 25 cm between the roof
opening and the outer frame (fig. 5).
A
NOTICE!
Connect the lighting on only one side.
I
NOTE
The connection is designed for an insulated flat plug which is
4.8 mm wide and 0.8 mm thick.
➤ Place the inner frame from inside onto the outer frame and align it
centrally (fig. 6).
EN
Intended use
5