Advertisement
connections
Make sure you connect the mixer's left (white)
and right (red) jacks to your sources' matching
left (white) and right (red) jacks. See your
user's guide for complete instructions on
making connections.
Remove the fuse compartment cap to replace the fuse.
accessories
Depending on how you plan to use your
mixer, some or all of the following items may
be purchased separately:
• audio patch cord
• microphone with an XLR plug
• microphone with
/
-inch plug
1
4
• stereo headphones
• 12V lamp bulb
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
Printed in China
All manuals and user guides at all-guides.com
32-2057
06A04
connect your tape deck
OUTPUT REC L/R —
here to record the mixer's output signal.
LINE 1, 2, 3, 4 —
CD player, tape deck, VCR, or camcorder here.
connect your receiver or amplifier here to
OUTPUT AMP L/R —
output the mixer sound through your stereo sound system.
connect up to two low-level
PHONO 1/2 —
audio sources, such as a turntable here.
connect a microphone
MIC —
with a
/
-inch plug here.
1
4
connect the phono source's
GND —
ground wire (green or black) here.
connect audio sources, such as a
Advertisement
