Edit Group Name; Edit Group Properties; 2: View Group Points; 3: Edit Opg Template - Honeywell 6808 Installation And Operation Manual

Programming
To edit a group, follow these steps:
1. Enter the installer code.
2. Select 7 for Program Menu.
3. Press 3 to enter group menu.
4. Press 1 to edit group.
5. Enter the number of the group you wish to edit, then press ENTER.

Edit Group Name

6. To edit the group name, press 1.
7. To edit the group name, press 1.
You can use words to display a descriptive name for a group.
NOTE: See Appendix B for editing names.

Edit Group Properties

The Edit Group Menu allows you to select options for each group for the following items:
• Template Override: Y or N
• When Template override is Yes. Template Override Cadence is available.
• See Section 9.4.3 for more information.
9.4.2 View Group Points
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Press 3 to enter group menu.
4. Press 2 to view group points.
5. Enter the group number, then press ENTER.
9.4.3 Edit OPG Template
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Press 3 to enter group menu.
4. Press 3 to edit OPG Template.
5. Enter the Template number, then press ENTER
6. Press ENTER on the template name to edit the name.
You can use words to display a descriptive name for a group.
NOTE: See Appendix B for editing names
7. Right arrow to the OPG and select YES or NO to select which output groups to include in the template.
102
Figure 9.4 Group Properties Programming Options
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017