Pre-Configuration Of Keys; Simultaneous Ring Personal; Accessing Simultaneous Ring Personal From The Phone Menu - Avaya J169 Instructions For Use Manual

Advanced features

Pre-configuration of keys

With the Pre-configuration of keys feature enabled, the Phone screen displays a pre-determined
set of phone keys for accessing features, applications, and line appearances. BLF lines and
autodialing phone extensions can be also added and accessed with this feature.
The phone key configuration can be forced by the system administrator. If pre-configured keys are
forced, mapping and labels cannot be customized.
If pre-configured keys are not forced, you can change their mapping and labels as required.
The forced keys have a priority over customizable keys. This does not apply to Call Appearance,
Shared Call Appearance and Busy Lamp Field keys as they will not be dropped but moved to a
different location.
Contact your system administrator if you need to replace, move, or relabel the forced keys.

Simultaneous Ring Personal

With the Simultaneous Ring Personal (SRP) feature, you can list up to 10 phone numbers or SIP-
URI addresses you want to receive calls to in addition to your primary phone. This feature may be
used when, for example, you are not at your desk phone and you need to answer a call from your
cell phone. Simultaneous ring can be turned off when you are at your desk on a call.
Important:
If your cell phone has the voice mail which is activated before your office voice messaging, the
voice messages will be recorded in your cell phone database.
Note:
If Simultaneous Ring Personal is activated, the corresponding LED on the phone is green. If
the feature is disabled, the LED is red. Contact your system administrator or go to the
BroadSoft web interface yourself to activate the feature. See
more information.

Accessing Simultaneous Ring Personal from the phone menu

About this task
Use this task to access Simultaneous Ring Personal page from the phone menu for configuring
the settings, viewing and editing the list of simultaneous ring numbers.
Procedure
1. On the phone, go to Main menu > Features.
2. Scroll to Simultaneous ringing, and press Config.
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
https://www.broadsoft.com/ for
84