Table of Contents
Advertisement
2 – Features of the CD-RW2000—Remote control unit
2.3 Remote control unit
1 OPEN/CLOSE key
Opens and closes the disc tray (equivalent to
2 Number keys (0 through 10 and +10)
Use these keys for direct entry of track numbers
when playing back, or making a programmed play
list.
3 CLEAR key
Use this key to clear a mistaken entry made with the
number keys.
4 REPEAT key
Use this key to change between the various repeat
modes when playing back (see 3.3, "Repeat play").
5 DISPLAY key
Use this key to switch between the different display
modes available (equivalent to
6 MENU key
Repeated presses of this key cycle through the differ-
ent menu items used to set parameters (equivalent to
9
).
7 ENTER key
Pressing this key is equivalent to pressing the
B
DIAL
control
to confirm an entry.
8 FADER key
Use this key to start fade-in recordings or to start a
fade-out when recording (equivalent to
9 MONITOR key
Use this key to output the signals received at the cur-
rently selected input(s) through the outputs when not
recording or in record ready mode.
A PLAY MODE key
Use this key to choose between the different play-
back modes (single play, continue play, etc.).
B FINALIZE key
Use this key to finalize recordable discs. See 1.2,
"Finalizing" and 5.1, "Finalizing" for details (equiva-
E
lent to
).
C ERASE key
Use this key (with CD-RW discs only) to erase
tracks, or a whole disc, or to refresh a "bad" disc, or
to unfinalize a finalized disc. See 5.2, "Erasing" for
F
details (equivalent to
).
3
).
A
).
MULTI
5
).
D RECORD key
Use this key to enter record ready mode (equivalent
J
to
).
E SYNC REC key
Use this key to turn synchronized recording on and
K
off (equivalent to
). See 4.3.1, "Synchronized
recording" for details).
F REC MUTE key
Use this key when recording, to mute the input signal
for about four seconds and then to enter record ready
mode (see 4.3.4, "Rec mute function").
G SEARCH keys
Use these keys to move the playback position inside
a track.
H SKIP keys
Use these keys to move between tracks when playing
back (equivalent to turning
set the parameter values, etc.
I STOP key
Use this key to stop playback or recording (equiva-
G
lent to
).
J PAUSE key
Use this key to pause playback or recording (equiva-
I
lent to
).
K CALL key
Used to start playback from the last pause position
before playback starts (equivalent to
L PLAY key
Use this key to start playback, or enter record mode
from record ready mode (equivalent to
2.4 Connections
The following should be noted when you connect the
unit to other equipment.
NOTE
Do not connect or disconnect audio or other equipment to
or from the CD-RW2000 while power is supplied to the
units. Always turn off the power when connecting or dis-
connecting units.
It is possible to connect the unit's
W
,
IN
DIGITAL COAXIAL IN
Y
to other equipment at the same time.
OPTICAL IN
However, the unit can receive signals from only one
digital input at a time.
TASCAM CD-RW2000
B
). They are also used to
L
).
H
).
DIGITAL AES/EBU
X
and
DIGITAL
13
Hide quick links:
Advertisement
Table of Contents
