Writing By Track At Once (Tao); Finalizing Cds - Tascam DP-02 Owner's Manual

IMPORTANT SAFETY PRECAUTIONS 4 – DP-02 Appendix
Use the cursor / keys to select, and set the length
§ ¶
of the gap to be made after each song by the
dial.
You can set any gap within the range 0.0 to 9.9
seconds in 0.1 second increments.
To end setting of the gap, press the
The display returns to the song list screen.
7. Press YES/ENTER to write to the CD. The following
write confirmation screen is displayed:
T I P
To return to the SONG ORDER screen, press the ˙
cursor key.

Writing by Track At Once (TAO)

With Track at Once, a silent gap of two seconds is auto-
matically added at the end of each track.
1. Press the key to bring up the
CD
menu and press
YES/ENTER
2. A list of songs including the master track is
displayed. Use the cursor (
song to write to the CD, and press the
key.
3. A menu screen for confirming whether or not to
finalize after writing ends is displayed. Use the dial
to select on or off and press

Finalizing CDs

If you are finished recording to a CD in TAO, you need to
finalize the CD so that it can be played on a regular CD
player.
1. Press and hold the
SHIFT
FINALIZE key.
The following confirmation message is displayed.

TASCAM DP-02/DP-02CF
DATA
YES/ENTER key.
M A S T E R W R I T E
.
/ ) keys to select a
§ ¶
YES/ENTER
YES/ENTER to finalize.
key and press the
8. After writing to the CD ends, the unit allows you to
make another copy of the same disc.
To write to another CD, press the
To cancel writing to another CD, press
key.
4. The following write confirmation screen is
displayed.
Press the
YES/ENTER
2. Press the YES/ENTER
YES/ENTER key.
NO/EXIT
key to write the CD.
key to finalize the CD.