Table of Contents
Advertisement
1 – Starting out with your DP-02/DP-02CF
IMPORTANT SAFETY INSTRUCTIONS
Features of the DP-02/DP-02CF
This section explains the features of the DP-02 and DP-02CF.
Top panel
ASSIGN (A,B) and ON/OFF keys
1
The
keys assign the input signals
ASSIGN (A,B)
through the
INPUT A
or
"Assigning inputs" on page 23.)
The
keys are used with the
ON/OFF
the
(
,
) on or off. When the input is set to on,
INPUT
A
B
the indicator next to the key lights up. When off, the
indicator is unlit.
OL indicators
2
The indicator lights when the input signal is too high.
LEVEL controls
3
Use this knob to adjust the
PHANTOM key
4
This key provides the phantom power (+48 V) to the
XLR input jacks (
INPUT A
not supplied to the 1/4 phone jacks.
INPUT MODE key and the indicators
5
Use this key to select the
modes (see "The INPUT MODE key" on page 13 for
details).
B
to the tracks (
1
to
8
). (See
key to turn
SHIFT
INPUT
(
A
,
B
) signal.
,
). The phantom power is
B
or
MONO X 2
STEREO
EFFECT key / A B key (DP-02 only)
6
Pressing the
key brings up the
EFFECT
screen.
E F F E C T
The
A B
key is used with the
input signal (
or
INPUT A
effects is used with (see "Multi-effect" in chapter 4
"DP-02 Appendix" on page 59). When
selected, the indicator next to
INPUT B
is selected, the indicator next to
up. When both indicators are unlit, neither of the inputs
are not selected.
PHONES control
7
Adjusts the headphone volume.
MASTER / PLAY key
8
Pressing
key alone turns the master recording
MASTER
mode on or off. When on, this key flashes.
With the
SHIFT
key,
PLAY
turn on or off the master playback mode. When on, this
key lights up (see "Mastering" on page 27).
BOUNCE key
9
Turns Bounce mode on or off. When on, this key lights
up.
TASCAM DP-02/DP-02CF
M U L T I
SHIFT
key to select the
) which the internal multi-
B
INPUT A
is
A
letter lights up. When
B
letter lights
(
MASTER
) key is used to
1
Hide quick links:
Advertisement
Table of Contents
