Charging The Batteries - Targus 410-0008-001A User Manual

Targus Wireless Laser Rechargeable Notebook Mouse
3 Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of each battery
match the polarity indicators inside the battery
housing.
WARNING: W
RECHARGEABLE BATTERIES
A
VOID MIXING NEW AND USED BATTERIES IN A DEVICE
4 Slide the battery cover back into position until it
"clicks" firmly into place.
5 Turn on the mouse by sliding the on/off switch on the
bottom of the mouse to the "on" position.
N : W
OTE HILE THE MOUSE IS FUNCTIONING
NAKED EYE
WHILE THE MOUSE IS ACTIVE

Charging the Batteries

For best results, you should charge the mouse at least 4
hours before using it. You can do this via the supplied
USB charge cable. To do this:
1 Connect the cable's USB connector into an available
USB port on your computer.
2 Connect the other end to the mouse.
NOTE: T
O CONTINUOUSLY CHARGE THE MOUSE VIA THE
YOUR COMPUTER MUST BE ON AND AWAKE
YOUR COMPUTER
.
MOUSE
HEN REPLACING THE BATTERIES
. N
. B
E CAREFUL NOT TO LOOK DIRECTLY INTO THE EMITTER HOLE
.
'
S POWER MANAGEMENT FEATURE WHILE CHARGING THE
,
EVER USE ALKALINE BATTERIES
,
NO LASER LIGHT IS VISIBLE TO THE
. F
6
-
USE ONLY HEAVY
.
.
USB
CHARGE CABLE
OR BEST RESULTS
N MH
DUTY I
,
,
TURN OFF