Remote Access; From An External Telephone - BT On-AIR 1300 Executive User Manual

On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August '01 ~ 3992

Remote access

You can operate your answering machine from
any external Touchtone
BT On-Air and entering your remote access code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
Important
You must change the Remote Access Code
from the default setting of 0000 for your
remote access to function.
To change your Remote
Access Code
L
Use the UP or DOWN button to scroll
M
to Base.
Press OK to confirm.
C OK
L
Use the UP or DOWN button to scroll
M
to Base settings.
C OK
Press OK to confirm.
L
Use the UP or DOWN button to scroll
M
to Answer.
Press OK to confirm.
C OK
L
Use the UP or DOWN button to scroll
M
to Remote acc.
C OK Press OK to confirm.
CODE
Enter your old four digit code. (Factory
setting is 0000)
29
All manuals and user guides at all-guides.com
phone by phoning your
TM
Press OK to confirm.
C OK
Enter your new four digit code.
CODE
Press OK to confirm.
C OK
The display will ask you to Confirm code.
Re-Enter your new code.
CODE
Press OK to confirm.
C OK
To switch on your answering machine
from another external telephone
If you forget to switch your answering
machine on you can do it from another
telephone:
Dial your telephone number and let the
phone ring. After approximately 10 rings
your On-Air will automatically answer,
although you will hear no message.
At this point press the
followed by your Remote Access Code.
CODE
Wait for the confirmation tone then
7
press 7.
Your answering machine will now be
switched on.
# button,