Technical Data; Rated Conditions; Maximum Permissible Ambient Temperatures In The Connection Area Of The Sensor; General Limitations For Compression Fittings - Siemens SITRANS TS100 Compact Operating Instructions

Technical data

8.1

Rated conditions

Storage
Storage temperature
Degree of protection in accordance with EN 60529
SITRANS TSinsert/SITRANS TS100/TS200/TS500
SITRANS TS300
SITRANS TSinsert/SITRANS TS100/TS200/TS500
SITRANS TS500 type 7MC75.. with head type AG0 and
AU0 (option G and U) in Non-SIL-applications
Caution
Ambient temperature of electronic and cable glands assembled to SITRANS TS500
If electronic and cable glands are assembled, their minimum permitted ambient temperature must also be rated up to the
minimum ambient temperature shown in the table above, otherwise the minimum ambient temperature of the complete
SITRANS TS500 is derated accordingly. Check the operating instructions of your used electronic and cable gland for more
information.
Note
Siemens temperature transmitters SITRANS TH as well as HAN 7D and M12 (option codes G12 and G13) connectors are
not rated to -50 °C but -40 °C.
See also
Nameplate structure (Page 18)
8.1.1 Maximum permissible ambient temperatures in the connection area of the
sensor
8.1.1.1

General limitations for compression fittings

Due to the PTFE sealing, standard compression fittings are limited to a maximum
temperature of 200 °C.
TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Compact Operating Instructions, 01/2018, A5E03920348-AE
-40 ... +80 °C (-40 ... +176 °F)
See nameplate.
Degree of protection is archived, when the device is correct-
ly installed. See chapter Installing (Page 23).
-20 °C
-40 °C
-50 °C
8
45