To Measure Body Weight Alone - Tanita BF-562 Instruction Manual

BF-562海外GB+D面付解除 ページ19
Graph Display Function
The equipment can record results for a maximum of 5 years, and display them as graphs. (This function is not available for individuals
whth no pre-set data, or who only measure their body weight).
1 Displaying graphs.
e. g. When you want to display the graph registered
against the Personal Memory Key 3.
With the display
clear.
press
U
"SELECT YOUR NO."
will be displayed
and the Personal
Memory Key will
blink.
Press your
Memory
Personal
Key.
(In this case, press 3.)
Remarks
In the following cases the measurement may be lost.
(If necessary record important measurements in a notebook).
When the equipment has been used continuously in
the wrong way.
When the equipment is subjected to static electricity
or electrical noise.
When malfunctions related to the recording
mechanism occur.
* Please note the manufacturer accepts no responsibility for damage caused by
loss and changes to the recorded data.
* Please note the manufacturer accepts no responsibility for any damage, lost
profits or any claims by a third party arising from the use of this equipment.
Display
Personal Memory Key
(for five individuals)
"GRAPH" Button
"Time/DOWN" Button
"UP" Button
"SET" Button
18
2 To display past measurements
Move the cursor from the current to the past by
pressing
(By pressing you
can move
kg
the cursor from the
past to the current
measurement.)
%
By pressing the
"Time/DOWN" button
you can move the cursor.
* Day Area:
-1 ~ -6 is displayed.
Week Area:
-1 ~ -12 is displayed.
Month Area:
Year and month
(e.g. 99-1) are displayed.
3 Displaying Measurements.
Press "SET"
(While pressed, the
figure at the cursor
U
position is displayed.)
If "NO DATA" is displayed,
e Measurements were
not recorded at the
time to which the
cursor is pointing.
(This is not a malfunction.)
The displayed figures are weekly and monthly
averages.
When you want to end the graph display function,
e Press WEIGHT only/OFF
button.
e If you do not operate the equipment for about 30
seconds, the power will automatically switch off.
(Automatic power off function)
Convenient Use
Measurements are recorded in the display box.
Recorded data can still be checked even if the display box
is separated from the weighing platform. Use this feature
if you need to consuit with professionals in sports clubs or
medical facilities.

To Measure Body weight alone

Points to Note
1
You cannot record the measurement results.
e To record the measurement results after
memorising personal data, please follow the
instructions specified in "How to Measure (For
Registered Individuals)" on page 16.
If body weight exceeds the measurement
range.
e "OL OVER LOAD" or "OVERLOAD" will be
displayed and you cannot measure yourself.
If you step on the scale platform before
"0.0" kg is displayed,
eDisplays such as ERROR -1.1 -OL
, or , will
appear or the power will be switched off
during measurement.
WEIGHT only/OFF Button
Display
Front
Electrode
Heel
Electrode
Press the "WEIGHT only/OFF"
Button.
(A short beep will sound.)
After 88888 is displayed
0.0 kg will be displayed.
2 Start measurement.
Step on the weighing
platform carefully
after kg is
0.0
displayed.
Your "Body Weight" will
be displayed.
Step off the scale
platform.
kg will be displayed
0.0
again and the power will be
switched off.
Automatic Power Off Function
If you do not step on the scale within 30
seconds after [0.0] is displayed, the
power will switch off.
19