Enabling And Creating Shadow Copies - Tandberg Data NAS Hardware Viking FS-1500 Administration Manual

Tandberg Data
__________________________________________________________________________________________________
4.4.

Enabling and Creating Shadow Copies

Enabling shadow copies on a volume automatically results in several
actions:
•
Creates a shadow copy of the selected volume
•
Sets the maximum storage space for the shadow copies
•
Schedules shadow copies to be made at 7 A.M. and 12 noon on
weekdays.
Note
Creating a shadow copy only makes one copy of the volume; it does not create a
schedule.
To enable shadow copies on a volume:
1. Access Disk Management.
2. Select the volume of the logical drive which you want to enable
shadow copy service and right-click on it.
3. Select Properties.
4. Select Shadow Copies tab.
Note
After the first shadow copy is created, it cannot be relocated. Relocate the cache file
by altering the cache file location under Properties prior to enabling shadow copy.
See "Viewing Shadow Copy Properties" in this chapter.
5. Click Enable.
To create a shadow copy on a volume:
1. On Shadow Copies tab, click on the Create Now button.
4-10 Tandberg Viking Series Storage Server Administration Manual
Shadow Copy Service