Create Virtual Disk Wizard - Tandberg Data NAS Hardware Viking FS-1500 Administration Manual

Tandberg Data
__________________________________________________________________________________________________
Select the identifier type from the Identifier Type list and
o
type the identifier in the Value field.
Repeat steps b and c for each identifier you want to add.
o
Click OK.
o
Click OK again to close the Advanced Identifiers page.
o
8. Click Next.
9. Click Finish to complete the wizard and create the iSCSI Target.

9.1.5. Create Virtual Disk Wizard

This section describes how to create an iSCSI Virtual Disk using the Create
Virtual Disk Wizard.
Notes
In order to create iSCSI Virtual Disks, it is required that physical disks are formatted
as NTFS.
1. In the Microsoft iSCSI Software Target MMC snap-in, click the
Devices node.
2. On the details view (right pane) of the Devices node, right-click a
volume and select Create Virtual Disk.
9-4 Tandberg Viking Series Storage Server Administration Manual
Using iSCSI Software Targets