Add Mapsvc.exe To The Exception List - Tandberg Data NAS Hardware Viking FS-1500 Administration Manual

Tandberg Data
__________________________________________________________________________________________________
To open ports in Windows Firewall:
1. On a computer running the User Name Mapping service or Server
for NFS, click Start, click Run, type firewall.cpl, and then click
OK.
2. Click the Exceptions tab, and then click Add Port.
3. In Name, type the name of a port to open, as listed in the following
table.
4. In Port number, type the corresponding port number.
5. Select TCP or UDP and click OK.
6. Repeat steps 2 through 5 for each port to open, and then click OK
when finished
Notes
Depending on your requirements, you may need to open Transmission Control
Protocol (TCP) ports, User Datagram Protocol (UDP) ports, or both TCP ports and
UDP ports. For testing purposes, we recommend that you open both TCP and UDP
transports for all protocols.
Microsoft Services for
NFS component
User Name Mapping
and Server for NFS
Server for NFS
Server for NFS
Server for NFS
Server for NFS
8.6.10.2.

Add mapsvc.exe to the exception list

On the computer running User Name Mapping, you must add the
Mapsvc.exe program to the Windows Firewall exception list.
To add Mapsvc.exe to the exception list:
1. On the computer running the User Name Mapping service, click
Start, click Run, type firewall.cpl, and then click OK.
2. Click the Exceptions tab, and then click Add Program.
3. Click Browse, click mapsvc.exe, and then click Open. By default,
this file is located in %windir%\System32.
4. Fore testing purposes, click Change scope, select Any computer,
and then click OK.
8-16
Microsoft Services for Network File System (MSNFS)
Port to open
Portmapper
Network Status Manager
Network Lock Manager
NFS Mount
Network File System
Tandberg Viking Series Storage Server Administration Manual
Protocol Port
TCP, UDP 111
TCP, UDP 1039
TCP, UDP 1047
TCP, UDP 1048
TCP, UDP 2049