Create A Diagnostic Report - Tandberg Data NAS Hardware Viking FS-1500 Administration Manual

Tandberg Data
__________________________________________________________________________________________________
Replication Delay - Click OK to close the dialog box that
o
warns you about the delay in initial replication.
After you finish the wizard, click the Branch Backups replication group in
the console tree and view the Memberships tab in the details pane. Notice
that two replicated folders were created, Projects and Proposals, as shown
in the following figure:
In the previous figure, notice that the path of the Projects and Proposals
replicated folders on server BO-08 (the hub server) are both within the
C:\Branch_Backups folder. This allows you to back up both replicated folders
from a single location on the hub.

7.6.5. Create a Diagnostic Report

In this task, you create a diagnostic report to check the status of replication.
The diagnostic report is an .html file that includes error and warning events,
replication statistics, backlogged files, and so forth for each member of the
replication group.
To create a diagnostic report
1. In the console tree of the DFS Management snap-in, under the
Replication node, right-click the Branch Backups replication
group, and then click Create Diagnostic Report.
2. Follow the steps in the Diagnostic Report Wizard and supply the
information in the following fields.
Path and Name - Accept the defaults.
o
Members to Include - Accept the defaults.
o
Options - Ensure that Yes, count backlogged files in this
o
report is selected, and also click the Count the replicated
files and their sizes on each member check box.
Review Settings and Create Report - Click Create to
o
create the diagnostic report.
Confirmation - The wizard closes automatically, and the
o
diagnostic report appears.
7-28 Tandberg Viking Series Storage Server Administration Manual
Distributed File System