Other Message - Roland CAMM-1 Pro PNC- 1410 Service Notes

6-1-1 OTHER MESSAGE

Error Message
Change Pinch
Roller Position
CLOSE COVER
Sheet Set Error
Set Sheet Again
Motor Error
Power ON Again
PAUSE
<CONT>STOP VIEW
The location of one or more of the pinch rollers is not correct.
If this happens, raise the sheet loading levers and move the pinch
rollers to the proper positions above the grit rollers.
Reposition the sheet to match this new alignment, then lower the
sheet loading levers to hold the sheet in place.
This displayed when the front cover is opened during cutting. Cutting
operation is halted, and the message is displayed on the screen.
Cutting restarts when the cover is closed.
This is displayed when the material has been loaded at a position where
the sheet sensor does not function.
Shows motor error status. This is displayed when the PNC-
1860/1410/1210 is heavily loaded, such as during a paper jam, when
heavy stock is cut across a long distance without initial sheet feed, or
when the sheet is abruptly pulled from the roll during cutting.
If the screen shown at lefts is displyed, it means that operation is
paused.
6 Trouble Shooting
Meaning
6
51