Siemens SIMATIC Panel PC 870 Equipment Manual page 59

Release 11/02
Screen display following power on
For example, the default setting of your computer unit will display the following
figure on the display on power on:
Phoenix BIOS 4.0 A5E000xxxxx–ES0x
Copyright 1985-2000 Phoenix Technologies Ltd.
All Rights Reserved.
SIMATIC Box PC 840 V10.01.02
CPU = Intel PentiumIII
640K System RAM Passed
127 MB Extended RAM Passed
0256K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowe
Mouse initialized
Fixed Disk 0: xxxx
ATAPI CD-ROM: Txxx
to enter SETUP
Press
By pressing the [F2] key when the above figure is displayed, the system switches
to the ROM-based BIOS Setup program. In this program, you can set a number of
system functions and hardware configurations of your programming device.
The default settings are effective on delivery. You can change these settings using
the BIOS setup. The modified settings become effective when you have saved
them and terminated the BIOS setup.
The following screen shots may differ from what is shown here, depending on the
device configuration.
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
Configuring the Computing Unit in BIOS Setup
1.26 GHz
d
5-3