Liquid Cooling Loop Replacement (Liquid Cooled Compute Modules Only); Liquid Cooling Loop Removal; Figure 41. Removing The Cross Head Screws; Figure 42. Removing The T-20 Screws - Intel S9200WK Series Setup And Service Manual

Intel® Server System S9200WK Product Family Setup and Service Guide
4.7

Liquid Cooling Loop Replacement (Liquid Cooled Compute Modules Only)

Before following the instructions in this section, remove the selected compute module from the server
chassis (see Section 4.2.1).
Required Tools and Supplies:
• Anti-static wrist strap and conductive foam pad (recommended)
• Phillips head screwdriver
• Torx* T-20 screwdriver
4.7.1

Liquid Cooling Loop Removal

1. Remove the ten screws indicated in Figure 41 with a phillips head screwdriver.
2. Remove the eight screws indicated in Figure 42 with a Torx* T-20 screwdriver.

Figure 41. Removing the cross head screws

Figure 42. Removing the T-20 screws

43