JVC KW-AVX708 Instructions Manual page 49

Symptoms
• The iPod or D. player does not turn on or does
not work.
• The sound is distorted.
• "Disconnect" appears on the monitor.
• For iPod: Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the monitor when
connecting a D. player.
• "NO FILES" or "NO TRACK" appears on the
monitor.
• "RESET 01" – "RESET 07" appears on the
monitor.
• "RESET 08" appears on the monitor.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
• "No Signal" appears on the monitor.
Sound mode
60 Hz
Flat 00
Hard Rock +03
R&B +03
Pop 00
Jazz +03
Dance +04
Country +02
Reggae +03
Classic +02
User 1/2/3 00
EN47-51_KW-AVX700UF_f.indd 49 EN47-51_KW-AVX700UF_f.indd 49
All manuals and user guides at all-guides.com
• Check the connecting cable and its connection.
• Charge the battery.
• For D. player: Update the firmware version.
Deactivate the equalizer either on this unit or the iPod/
D. player.
Check the connecting cable and its connection.
The headphones are disconnected during playback. Restart
playback.
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then, connect it
again.
No tracks are stored. Import tracks to the iPod or D. player.
Disconnect the adapter from both this unit and iPod/D.
player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.
• Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
Preset equalizing values
150 Hz 400 Hz 1 kHz
00 00 00
+03 +01 00
+02 +02 00
+02 00 00
+02 +01 +01
+02 00 –02
+01 00 00
00 00 +01
+03 +01 00
00 00 00
49
Remedies/Causes
2.5 kHz 6.3 kHz 15 kHz
00 00 00
00 +02 +01
+01 +01 +03
+01 +01 +02
+01 +03 +02
–01 +01 +01
00 +01 +02
+02 +02 +03
00 +02 00
00 00 00
06.5.23 10:27:51 AM 06.5.23 10:27:51 AM