JVC KW-AVX708 Instructions Manual page 46

Playing SD cards
• The required recording format is FAT 16/32
and the recommended storage type is 8 MB to
512 MB.
iPod® or D. player operations
• When you turn on this unit, the iPod or
D. player is charged through this unit.
• The text information may not be displayed
correctly.
– due to incompatibility of the recorded
characters, such as accented letters.
– due to communication condition between
the iPod or D. player and the unit.
• This unit can display up to 40 characters.
• You cannot display the Chinese characters for
the text information correctly even though
you have selected Simplified Chinese or
Traditional Chinese for "Language."
Notice:
When operating an iPod or a D. player,
some operations may not be performed
correctly or as intended. In this case, visit the
following JVC web site:
For iPod users: <http://www.jvc.co.jp/
english/car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
Title assignment
• If you try to assign titles to more than 30 radio
stations, or 30 CDs, "NAME FULL" flashes
for a while. Delete unwanted titles before
assignment.
• Titles assigned to CDs in the CD changer can
also be shown if you play back the discs in the
built-in DVD/CD player and vice versa.
EN43-46_KW-AVX700UF_f.indd 46 EN43-46_KW-AVX700UF_f.indd 46
All manuals and user guides at all-guides.com
Menu settings
• GB13000 character set is used for displaying
tags and other text information when you
select "Chinese Simple" for "Language." When
you select "Chinese Trad." (☞ page 37), Big5
character set is used.
– Some characters may not be displayed
correctly if different character sets are used
for the album name and the artist name.
• If you change the "Amplifier Gain" setting
from "High Power" to "Low Power" while the
volume level is set higher than "30," the unit
automatically changes the volume level to
"VOL 30."
• After you change any of "Menu Language/
Audio Language/Subtitle" settings, turn off then
on the power, and re-insert the disc (or insert
another disc) so that your setting takes effect.
• When you select "16:9" for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if "4:3 PS" is selected, the screen size
may become "4:3 LB" for some discs.
• When selecting "None" for the center/rear
speakers and "Off" for subwoofer (Speaker
Size), surround setting is canceled and cannot
be adjusted.
• Center speaker size cannot be set to "Large"
if both the front and rear speakers are set to
"None" or "Small."
About sounds reproduced through the rear
terminals
• Speaker out/analog discrete output (F-
OUT/R-OUT/CENTER/SUBWOOFER):
Multi-channel signals are emitted for a
multi-channel encoded disc. (When Dual
Zone is activated, the same signal emitted
through 2nd AUDIO OUT plugs are
emitted for the main source "DISC.")
• 2nd AUDIO OUT: 2-channel signal is
emitted when Dual Zone is activated.
When playing a multi-channel encoded
disc, multi-channel signals are downmixed
(except for some DVD Audio).
46
06.5.23 10:27:20 AM 06.5.23 10:27:20 AM