B
Handling and Storing
Connecting WR-62
Waveguide
Connecting the Waveguide Properly
Handle and store the devices with care; their continued performance and
accuracy depend on maintaining precise mechanical tolerances. When the
devices are not in use, replace their protective end caps.
Unlike threaded devices, waveguide mating planes are flanges (often
precision) that you must carefully screw together. Always connect
waveguide in the same flange orientation. For example, use the label as a
reference and always connect a device with the label facing the same
direction.
Wear
While connector wear can eventually degrade performance, properly
connected waveguide flanges experience very little wear, and should have a
long life.
Visual Inspection
Each time you make a connection, inspect mating surfaces for dirt, dust,
foreign particles, or scratches which can degrade device performance. A
damaged mating surface can damage any good surface connected to it. If
necessary, clean all mating surfaces using alcohol and a lint-free swab or
cloth.
Connecting the Waveguide Properly
HP 85325A Operating and Service Manual B-1